Brentwood, Oakley, Antioch and Discovery Bay
Pool Light Repair & LED Replacement in Brentwood, CA
A pool light that won't turn on, flickers, or trips the breaker is an underwater electrical problem, and it's one to leave to a professional. Often the fix is a new LED fixture that uses less power and lasts much longer.
No obligation. Repairs and equipment only, not weekly cleaning.

Pool Light Repair: quick answers
How urgent is it?
Not urgent, unless the GFCI keeps tripping or there's water inside the fixture. Then leave the light off until it's checked. Pool lighting is electrical work in water and should only be done by someone qualified for it.
How long does it take?
Most light repairs and LED swaps are one visit. Pulling a new cord through a blocked conduit takes longer.
What changes the price?
- A bulb or lamp swap versus a new fixture
- LED conversion, and whether the transformer or controller changes
- Cord length and condition in the conduit
- Whether the water has to be lowered to reach the niche
What the light is doing
- Won't turn on
- Bulb, GFCI or breaker, transformer, switch, or wiring.
- Trips the GFCI
- Water in the fixture or a wiring fault. Leave it off until checked.
- Water inside the lens
- A failed lens gasket. It needs resealing or replacement.
- Loose in the niche
- The fixture has come loose or the niche is damaged.
Safety first
Pool lights sit underwater and run on household or low-voltage power. If the light trips the GFCI, don't keep resetting it, and keep people out of the water until it's checked.
How a pool light comes out for service
Most pool lights sit in a niche in the wall with extra cord coiled behind them, so a technician can unscrew the fixture and lift it onto the deck without draining the pool. That's where the bulb, the lens gasket, and the cord connection get checked. If the cord is too short or the conduit is damaged, the job gets bigger. A light niche is also a common spot for leaks: if the water level stops at the light, see pool leak detection.
Converting to LED
- Longer life: HomeGuide notes LED pool lights can last 10–20 years, versus 1–3 for incandescent bulbs.
- Lower running cost and color options on many fixtures.
- Compatibility: the new fixture needs to match the niche size and the supply voltage (some pools use a low-voltage transformer).
- Controls: color LEDs may tie into the pool's automation system.
Is pool light repair what you need?
Call about this when
- The light is out, flickers or trips the GFCI
- Fogging or water inside the lens
- You want to convert an old incandescent light to LED
It's probably something else when
- The water level stops at the light: that's a leak at the light niche
- Landscape or deck lighting, which is a general electrician's job
What pool light repair usually costs
Simple pool light repairs commonly run about $75–$500+. Replacing a fixture costs more, usually somewhere around $400–$2,000+ installed, with LED conversions in that range. Rough ranges only; cord and conduit problems add to the job.
Rough ranges, not a quote; every pool is different. More ranges: pool repair costs in Brentwood.
Pool Light Repair: common questions
Why won't my pool light turn on?
Start with the switch, breaker, and GFCI. If those are fine, the bulb, fixture, transformer, or wiring is the likely cause. If the GFCI trips when the light is on, leave it off and call a professional.
Do you have to drain a pool to change the light?
Usually not. Most fixtures have extra cord coiled in the niche so they can be lifted onto the deck for service.
How much does it cost to replace a pool light?
Usually somewhere around $400–$2,000+ installed per fixture, depending on the light and the conduit. Simple repairs cost less.
Related pool repairs
Pool Equipment Repair
Not sure what's broken on the pad? Valves, timers, automation, salt cells, plumbing, and full pad upgrades.
Pool Leak Detection
Losing more than evaporation? Find the leak in the skimmer, plumbing, light niche, or shell and fix it.
Pool Tile Repair
Loose, cracked, or missing waterline tile, calcium buildup, and damaged coping stones.
Pool down, leaking, or won't heat?
Call or send a 30-second request for a pool repair quote in Brentwood, Oakley, Antioch or Discovery Bay.